Hard Drives


These rails allow a 3.5 inch HDD to be mounted in a 5.25 inch bay and are supplied with a pack of fixing screws.


 Reduce hard disk drive temperature.
• Extends your hard disk drive life and reliability.
• Fits 3 1/2" hard disk drive (1" and 1.62" thickness).

  • Discrete PCB for direct Storage Device attachment
  • Needs no Drivers, converts at Boot Time
  • Single 40-Pin IDE Port; Two SATA Ports
  • Single 4-Pint Power Connector
  • Converts SATA to Parallel ATA
  • Converts Parallel ATA to SATA
  • Supports ATA100/133 Specification
  • Fully compliant with Serial ATA Specifications
  • Unique activity LED on PCB
  • Bundled Molex Power Cable and SATA Data Cable


 USB 3.0 or 2.0 interface
 Supports 2.5/3.5 IDE, 2.5/3.5 SATA drives. CD-Rom, DVD-Rom Drives, CD-RW, and DVD-RW Drives.
 Supports OTG Function
 Windows 98E, Windows 2000, Windows ME, Windows XP, Windows Vista, Windows 7,Windows 8 , Mac OS.
Package Contents
 1 x IDE HDD Adapter
 1 X 7 Pin SATA Cable
 1 x 4 Pin Power Cable
 1 x UK Plug Power Cable
 1 x Power Adapter
 1 x CD Driver
 1 x Installation Guide


Converts 3.5" to support 2.5" Laptop/SSD drives
The SSD-RAIL is a very low cost and easy to install mounting assembly, produced in ABS plastic to allow easy fitment of any 2.5" HDD or SSD Drive into your existing 3.5" Drive bay found on Server, Workstation and Desktop computers. The adapter cradle can also be used for other media types including 2.5" Tape Backup and media card readers also.

Key Features:

Lightweight ABS Plastic 2.5" HDD/SSD cradle
Ideal for 2.5" HDD or SSD fitment into 3.5" Drive Bays
Multi-slot design for a secure and tailored fit into any system
Screw fixings supplied as standard
Add enhanced Storage Potential and reduce costs
Ideal for all systems, Desktops, Workstations and Servers

More Information
Dynamode understands that you might already have Data and Power cables for your new SATA or other interface Mass Storage Device, so we do not bundle unnecessary hardware that you will not use. Ideal for
System builders and enthusiasts looking to get the most from there existing setup.


Product Family : 860 EVO
Product Type : Solid State Drive
Sequential Read (AS SSD) : 540 MB/s
Sequential Write (AS SSD) : 520 MB/s
Shock (Non Operating) : 1500 g
Software Included : Data Migration and Drive Management Software
Storage Capacity : 500 GB 

This Serial ATA Hard Drive Adapter lets you add a second hard drive to the laptop systems. With a second hard drive, you can quickly store and back up critical data. Add this caddy to your laptop to give you another hard drive. Simply remove your CD/DVD-ROM drive and put the Caddy (with the added hard drive) in its place
For easy connection of storage device or optical drive to IDE/SATA motherboard
Bi-directional SATA to IDE interface
Simple slide selection; select Device for SATA-IDE and Host for IDE-SATA
ATA 133, SATA 1.0 specification 1.5Gbps data rate
Supports SATA hot-plug
Connect a SATA drive to a legacy IDE port, or an IDE drive to a SATA motherboard port
Cost-effective solution for upgrading existing IDE systems to support SATA drives
Unique status LED shows activity
Fully SATA compliant and supports ATA100/133
No drivers required
Contents: Adaptor, power cable and SATA data cable